电镀设备的任何机械设备都需要正确的日常维护。只要正确的维护可以确保设备的正常运行，在这里我们将为您介绍电镀设备的日常维护。希望这种分析可以帮助您充分利用电镀设备。

Any mechanical equipment of electroplating equipment needs proper routine maintenance. As long as the correct maintenance can ensure the normal operation of the equipment, here we will introduce the daily maintenance of electroplating equipment for you. It is hoped that this analysis can help you to make full use of electroplating equipment.

电镀设备的作用是防止毒物从皮肤侵入人体，避免强酸，强碱和其他毒物对皮肤的损害，并避免汞和其他强力吸附在头发和衣服上的毒物的吸附。车间有多种类型的人身保护，应根据所食用有毒物质的类型，性质和工作条件而定。

The function of electroplating equipment is to prevent poison from invading the human body from the skin, to avoid the damage of strong acid, alkali and other poisons to the skin, and to avoid the adsorption of mercury and other toxic substances strongly adsorbed on the hair and clothes. There are many types of personal protection in the workshop, which should be determined according to the type, nature and working conditions of toxic substances consumed.

选择合适的品种和型号。如果电镀设备工作场所的空气中的毒物为易燃易爆气体，则应选择防静电保护设备，以免人体静电引起的爆炸事故。 设备的电镀毒物可从皮肤侵入人体。

Choose the right variety and model. If the poisons in the air of electroplating equipment workplace are flammable and explosive gases, anti-static protection equipment should be selected to avoid explosion accidents caused by human body static electricity. The electroplating poison of the equipment can invade the human body from the skin.

除引起人类疾病外，它还可以作用于皮肤，形成职业性皮肤病。为防止有毒物质从皮肤侵入人体，除了个人防护设备外，还应在裸露的皮肤上使用皮肤保护剂。常用的保护剂是软膏，糊剂，成膜剂和乳剂。

In addition to causing human diseases, it can also act on the skin to form occupational skin diseases. In order to prevent toxic substances from entering the human body from the skin, in addition to personal protective equipment, skin protectants should also be used on the exposed skin. Common protectants are ointment, paste, film-forming agent and emulsion.

在电镀设备运行期间，各种规格的桶式电镀机应始终保持警惕，尤其是在异常情况下。 一旦发现设备异常运行，应立即切断设备电源，并由专业人员进行维修。当连续电镀设备工作时，无法进行调整。自动滚镀生产线是指设备的工作周期。在此期间，请勿进行任何调整或维护工作，否则将无法连续工作，导致工作结果出现一定偏差，不利于标准化生产。

During the operation of electroplating equipment, all kinds of barrel electroplating machines should always be vigilant, especially in abnormal conditions. Once the abnormal operation of the equipment is found, the power supply of the equipment shall be cut off immediately and repaired by professional personnel. When the continuous plating equipment is working, it can not be adjusted. Automatic barrel plating production line refers to the working cycle of the equipment. During this period, do not carry out any adjustment or maintenance work, otherwise it will not be able to work continuously, resulting in a certain deviation in the work results, which is not conducive to standardized production.

关于电镀生产线更好的为企业服务就要找到良好的电镀设备厂家.

About electroplating production line, better service for enterprises is to find a good electroplating equipment manufacturers